Description
The one to look at if the problem is furniture rather than floors. At 81mm tall it is one of the slimmest robot vacuum and mops ServiceBot tracks, and that is the whole argument for it.
- 81mm body: Low enough to clean under a lot of Australian furniture that a 95–100mm robot simply cannot get beneath. ECOVACS credit the dToF LiDAR layout for the height.
- 15,000Pa suction: The lowest published figure in this comparison, and still well past what everyday carpet and hard floors need.
- 9mm auto mop lifting: Published by ECOVACS Australia. Enough to cross short-pile carpet without wetting it.
- Extendable side brush and mop: Both reach out from the chassis to clean closer to edges and corners.
- ZeroTangle 2.0: Anti-tangle brush aimed at long and pet hair.
- 75°C hot-water mop washing in the all-in-one station, with auto dust collection.
- Obstacle avoidance: 3D structured light. ECOVACS also list an RGB camera among its edge-cleaning sensors.
Do not buy this if nothing in your house sits between 81mm and 100mm off the floor. If clearance is not your problem, the suction figure is the lowest here and you would do better elsewhere.
Specifications taken from the ECOVACS Australia product page, checked 16 October 2026.
